CO2 incubator BB 15

CO2 incubator BB 15 Capacity 151 l With air jacket heating for constant temperature as well as a second control circuit that takes over the control of the set temperature in the event of failure. The chamber floor is used as a water reservoir (an electric extraction pump for water exchange is included in the scope of delivery). Due to the larger water surface and the direct heat transfer from the heated soil, a faster moisture recovery time is achieved. Working temperature range of 3 °C above room temperature to 55 °C *(in steps of 0.1 °C) and CO2 concentrations up to 20 % (in steps of 0.1%) Digital indication for °C and CO2 content Tube throughput 42 mm in the back wall allows the use of additional devices Interior space of stainless steel Constant humidity at 37 °C approx. 95 % RH Additional glass interior door, heated exterior door For the provision of the incubator with CO2, a separate glass bottle or a central pressure gas reservoir is required For humidification, treated water is needed (demineralised/distilled and autoclaved or demineralised/distilled and autoclaved) Technical data: Content 151 l Temperature deviation in time/in space ±0.1 / ±0.5 K CO2 constant ±0.3 % Dimensions inside (W x H x D) 470 x 607 x 530 mm Exterior dimensions (W x H x D) 637 x 867 x 766 mm Dimensions perforated inserts (W x D) 423 x 455 mm Shelves Delivery incl. / max. recording 3 / 10 Required input pressure 0.8 to 1.0 bar, 99.5 vol.-% medical CO2 quality Suction air filtration CO2 filter, PTFE filter 0,