Innovative incubator shaker design allowing unattended operation in a temperature-controlled environment.
Large LED display for speed and time settings
Controls with antimicrobial coating for reduction of bacteria
Integrated PID temperature control (use of two PT 1000 temperature sensors)
Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60
Electronic temperature and speed control
Electronic timer switch: 0 - 999 h (set by the minute or by the hour)
Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control
Unit switches off automatically if disturbed
Unit stops automatically when hood is lifted
Collecting tray with drain hose on rear of unit
Simple operation
All functions can be controlled and documented with labworldsoft®
Attachements are not included in delivery, please order seperatly
Shaking movement: orbital Orbital diameter: 20 mm Max. shaking weight (with attachment): 7,5 kg Infinitely adjustable speed range: 10 - 500 rpm Heat output: 1.000 W Temperature range: RT + 5°C to 80 °C
Scope of delivery
KS 3000 i control
PT 1000.80 Temperature sensor, stainless steel
Clamping screws short (4x)
PC 1.1 Cable
USB cable
$$$$$
Type of movement
orbital
Shaking stroke
20 mm
Permissible shaking weight (incl. attachment)
7.5 kg
Motor rating input
45 W
Motor rating output
10 W
Permissible ON time
100 %
Speed min (adjustable)
10 rpm
Speed range
10 - 500 rpm
Speed display
LED
Speed deviation
1 %
Speed control
1 RPM steps
Timer
yes
Timer display
7 segment LED
Time setting min.
1 s
Time setting range
1 - 59940 min
Operating mode
timer and continuous operation
Heating temperature range
room temp. +5° - 80 °C
Heat output
1000 W
Set temperature resolution
0.1 ±K
Control accuracy with sensor (1 vessel 0.5 L H2O, RT 22°C, T=37°C)
0.5 ±K
Temperature display
yes
Temp. stability (0,2l H2O; RT 25°C, T=37°C)
0.1 ±K
Operating area inner chamber
330 x 330 x 258 mm
Total volume inner chamber
50 l
Raw material housing
Sheet metal powder coat
Raw material hood
PMMA
Raw material front foil
polyester
Raw material front panel
ABS painted
Temperature stability (1 vessel 0.5 L, RT 25°C, T=37°C)
0.05 ±K
Temperature homogenity (5 vessel 0.5 L; RT 25°C, T=37°C)
0.5 ±K
Height with open hood
875 mm
Dimensions (W x H x D)
465 x 430 x 695 mm
Weight
35 kg
Permissible ambient temperature
15 - 32 °C
Permissible relative humidity
80 %
Protection class according to DIN EN 60529
IP 30
RS 232 interface
yes
USB interface
yes
Voltage
230 / 115 / 100 V
Frequency
50/60 Hz
Power input
1120 W
%%%%%
Documents for Qualification (IQ/ OQ) LAB
Proprietary Calibration Certificate/ LAB
STICKMAX
AS 260.2 Fixing clip attachment
AS 260.3 Dish attachment
AS 260.5 Separating funnel attachment
AS 1.61 Clamping roll
AS 1.60 Basic holder
AS 260.1 Universal attachment
AS 2.1 Fixing clips, 25 ml
AS 2.2 Fixing clips, 50 ml
AS 2.3 Fixing clips, 100 ml
AS 2.4 Fixing clips, 200/250 ml
AS 2.5 Fixing clips, 500 ml
AS 2.6 Fixing clips, 1000 ml
AS 2.7 Fixing clips, 2000 ml
PT 1000.80 Temperature sensor, stainless steel
Innovative incubator shaker design allowing unattended operation in a temperature-controlled environment.
Large LED display for speed and time settings
Controls with antimicrobial coating for reduction of bacteria
Integrated PID temperature control (use of two PT 1000 temperature sensors)
Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60
Electronic temperature and speed control
Electronic timer switch: 0 - 999 h (set by the minute or by the hour)
Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control
Unit switches off automatically if disturbed
Unit stops automatically when hood is lifted
Collecting tray with drain hose on rear of unit
Simple operation
All functions can be controlled and documented with labworldsoft®
Attachements are not included in delivery, please order seperatly
Shaking movement: orbital Orbital diameter: 20 mm Max. shaking weight (with attachment): 7,5 kg Infinitely adjustable speed range: 10 - 500 rpm Heat output: 1.000 W Temperature range: RT + 5°C to 80 °C
Scope of delivery
KS 3000 i control
PT 1000.80 Temperature sensor, stainless steel
Clamping screws short (4x)
PC 1.1 Cable
USB cable
$$$$$
Type of movement
orbital
Shaking stroke
20 mm
Permissible shaking weight (incl. attachment)
7.5 kg
Motor rating input
45 W
Motor rating output
10 W
Permissible ON time
100 %
Speed min (adjustable)
10 rpm
Speed range
10 - 500 rpm
Speed display
LED
Speed deviation
1 %
Speed control
1 RPM steps
Timer
yes
Timer display
7 segment LED
Time setting min.
1 s
Time setting range
1 - 59940 min
Operating mode
timer and continuous operation
Heating temperature range
room temp. +5° - 80 °C
Heat output
1000 W
Set temperature resolution
0.1 ±K
Control accuracy with sensor (1 vessel 0.5 L H2O, RT 22°C, T=37°C)
0.5 ±K
Temperature display
yes
Temp. stability (0,2l H2O; RT 25°C, T=37°C)
0.1 ±K
Operating area inner chamber
330 x 330 x 258 mm
Total volume inner chamber
50 l
Raw material housing
Sheet metal powder coat
Raw material hood
PMMA
Raw material front foil
polyester
Raw material front panel
ABS painted
Temperature stability (1 vessel 0.5 L, RT 25°C, T=37°C)
0.05 ±K
Temperature homogenity (5 vessel 0.5 L; RT 25°C, T=37°C)
0.5 ±K
Height with open hood
875 mm
Dimensions (W x H x D)
465 x 430 x 695 mm
Weight
35 kg
Permissible ambient temperature
15 - 32 °C
Permissible relative humidity
80 %
Protection class according to DIN EN 60529
IP 30
RS 232 interface
yes
USB interface
yes
Voltage
230 / 115 / 100 V
Frequency
50/60 Hz
Power input
1120 W
%%%%%
Documents for Qualification (IQ/ OQ) LAB
Proprietary Calibration Certificate/ LAB
STICKMAX
AS 260.2 Fixing clip attachment
AS 260.3 Dish attachment
AS 260.5 Separating funnel attachment
AS 1.61 Clamping roll
AS 1.60 Basic holder
AS 260.1 Universal attachment
AS 2.1 Fixing clips, 25 ml
AS 2.2 Fixing clips, 50 ml
AS 2.3 Fixing clips, 100 ml
AS 2.4 Fixing clips, 200/250 ml
AS 2.5 Fixing clips, 500 ml
AS 2.6 Fixing clips, 1000 ml
AS 2.7 Fixing clips, 2000 ml
PT 1000.80 Temperature sensor, stainless steel
Innovative incubator shaker design allowing unattended operation in a temperature-controlled environment.
Large LED display for speed and time settings
Controls with antimicrobial coating for reduction of bacteria
Integrated PID temperature control (use of two PT 1000 temperature sensors)
Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60
Electronic temperature and speed control
Electronic timer switch: 0 - 999 h (set by the minute or by the hour)
Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control
Unit switches off automatically if disturbed
Unit stops automatically when hood is lifted
Collecting tray with drain hose on rear of unit
Simple operation
All functions can be controlled and documented with labworldsoft®
Attachements are not included in delivery, please order seperatly
Shaking movement: orbital Orbital diameter: 20 mm Max. shaking weight (with attachment): 7,5 kg Infinitely adjustable speed range: 10 - 500 rpm Heat output: 1.000 W Temperature range: RT + 5°C to 80 °C
Scope of delivery
KS 3000 i control
PT 1000.80 Temperature sensor, stainless steel
Clamping screws short (4x)
PC 1.1 Cable
USB cable
$$$$$
Type of movement
orbital
Shaking stroke
20 mm
Permissible shaking weight (incl. attachment)
7.5 kg
Motor rating input
45 W
Motor rating output
10 W
Permissible ON time
100 %
Speed min (adjustable)
10 rpm
Speed range
10 - 500 rpm
Speed display
LED
Speed deviation
1 %
Speed control
1 RPM steps
Timer
yes
Timer display
7 segment LED
Time setting min.
1 s
Time setting range
1 - 59940 min
Operating mode
timer and continuous operation
Heating temperature range
room temp. +5° - 80 °C
Heat output
1000 W
Set temperature resolution
0.1 ±K
Control accuracy with sensor (1 vessel 0.5 L H2O, RT 22°C, T=37°C)
0.5 ±K
Temperature display
yes
Temp. stability (0,2l H2O; RT 25°C, T=37°C)
0.1 ±K
Operating area inner chamber
330 x 330 x 258 mm
Total volume inner chamber
50 l
Raw material housing
Sheet metal powder coat
Raw material hood
PMMA
Raw material front foil
polyester
Raw material front panel
ABS painted
Temperature stability (1 vessel 0.5 L, RT 25°C, T=37°C)
0.05 ±K
Temperature homogenity (5 vessel 0.5 L; RT 25°C, T=37°C)
