Non ci sono articoli nel tuo carrello
KS 4000 ic control
Informazioni sul prodotto
Handleiding
Specifiche tecniche
Accessori
Informazioni
Innovative incubator shaker design allowing unattended operation in a temperature-controlled environment.
- Large LED display for speed and time settings
- Controls with antimicrobial coating for reduction of bacteria
- Integrated PID temperature control (use of two PT 1000 temperature sensors)
- Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60
- Electronic temperature and speed control
- Electronic timer switch: 0 – 999 h (set by the minute or by the hour)
- Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control
- Unit switches off automatically if disturbed
- Unit stops automatically when hood is lifted
- Collecting tray with drain hose on rear of unit
- Simple operation
- All functions can be controlled and documented with labworldsoft®
- Attachements are not included in delivery, please order seperatly
Shaking movement: orbital
Orbital diameter: 20 mm
Max. shaking weight (with attachment): 20 kg
Infinitely adjustable speed range: 10 - 500 rpm
Heat output: 1.000 W
Temperature range: RT + 5 °C to 80 °C
Scope of delivery
- KS 4000 ic control
- PT 1000.60 Temperature sensor, stainless steel
- Clamping screws short (4x)
- Clamping screws long (2x)
- Cable RS 232
| Type of movement | orbital |
| Shaking stroke | 20 mm |
| Permissible shaking weight (incl. attachment) | 20 kg |
| Motor rating input | 82 W |
| Motor rating output | 24 W |
| Permissible ON time | 100 % |
| Speed min (adjustable) | 10 rpm |
| Speed range | 10 - 500 rpm |
| Speed display | LED |
| Speed deviation | 5 ±rpm |
| Speed control | 1 RPM steps |
| Timer | yes |
| Timer display | 7 segment LED |
| Time setting range | 1 - 59940 min |
| Operating mode | timer and continuous operation |
| Heat output | 1000 W |
| Set temperature resolution | 0.1 ±K |
| Control accuracy with sensor (1 vessel 0.5 L H2O, RT 22°C, T=37°C) | 0.5 ±K |
| Temperature display | yes |
| Temp. stability (0,2l H2O; RT 25°C, T=37°C) | 0.1 ±K |
| Temperature range (inlet T>3°C) | room temp. - 10° - 80° °C |
| Operating area inner chamber | 440 x 440 x 352 mm |
| Total volume inner chamber | 90 l |
| Raw material housing | Sheet metal powder coat |
| Raw material front foil | polyester |
| Temperature stability (1 vessel 0.5 L, RT 25°C, T=37°C) | 0.05 ±K |
| Temperature homogenity (5 vessel 0.5 L; RT 25°C, T=37°C) | 0.5 ±K |
| Height with open hood | 875 mm |
| Dimensions (W x H x D) | 580 x 520 x 750 mm |
| Weight | 55 kg |
| Permissible ambient temperature | 15 - 32 °C |
| Permissible relative humidity | 80 % |
| Protection class according to DIN EN 60529 | IP 30 |
| RS 232 interface | yes |
| Voltage | 230 / 115 / 100 V |
| Frequency | 50/60 Hz |
| Power input | 1120 W |
| Fuse | 2x T10A 250V |
%%%%%
 |
Documents for Qualification (IQ/ OQ) LAB |
 |
Proprietary Calibration Certificate/ LAB |
 |
AS 1.400 Basic holder |
 |
AS 1.401 Clamping roll |
 |
AS 1.402 Fastening screw |
 |
STICKMAX |
 |
AS 4000.1 Universal attachment |
 |
AS 4000.2 Fixing clip attachment |
 |
AS 4000.3 Dish attachment |
 |
AS 2.1 Fixing clips, 25 ml |
|
AS 2.2 Fixing clips, 50 ml |
|
AS 2.3 Fixing clips, 100 ml |
|
AS 2.4 Fixing clips, 200/250 ml |
|
AS 2.5 Fixing clips, 500 ml |
|
AS 2.6 Fixing clips, 1000 ml |
|
AS 2.7 Fixing clips, 2000 ml |
 |
PT 1000.60 Temperature sensor, stainless steelMade of stainless steel, for use with RCT basic, RET basic and C-MAG HS digital series. |
 |
PC 1.1 CableCable 2 RS 232/9/M/F |
 |
H 11 Mains cable Euro plug |
